Biodiesel Accessories - BIODIESEL FUELING STATION KIT FILTERED BIODIESEL FROM A HOME ROLL-AROUND STATION
-
-
- Now you can have your own portable biodiesel fueling station! Just insert thefuel draw tube into the 2-€ porton your barrel, attach the hose support and connect the power clips to a 12 volt car battery to start pumping biodiesel into your vehicle. The water absorbing filter has a clear housing to check forwater and a drain to remove it. The resettable meter measures in gallons. The fill hose is equipped with a gas-station style nozzle to fill up at over 5gallons per minute. Re-filling the barrel is easily done through the standard-¾-€ barrel bung port.KIT INCLUDES: (barrel not included)
- 12VDC/10A 5GPM diesel transfer pump
- Fuel draw tube kit with screen filter
- 10 micron particle and water-blocking filter
- Spare filter cartridge and housing wrench
- Dispensing meter calibrated in gallons
- 10 foot dispensing hose and nozzle
- Hose support assembly
- Barrel dolly on heavy duty castersOrder Item FSK-1
OIL PRE-HEATER KIT ACCELERATE YOUR PRODUCTION
This kit includes a 1KW heating element with a thermostatic control. Simply wrap the heaterband just under the lower ridge on your oilbarrel and snap the spring in place.Then wrap the included special insulation around your oil barrel and reaction tank, and seal them inplace with the aluminum tape. Set the thermostat and in 2-3 hours it will heat 40 gallons of oil from 70F to120F. It will accelerate your biodiesel production process by 5-6X and improve your yields. It's perfectfor those cold garages or sheds. -
Order Item OPK-1000D
-
- - OIL TRANSFER KIT MAKES OIL COLLECTION A SNAP
- This is the easiest way to transfer cooking oil frompails, barrels and tubs into your 55 gallon oil collection barrel. Just connect the pump to a 12 volt carbattery, insert the draw tube into the oil vat and turn on the pump. It will transfer oil at about 5 gallons per minuteand draws only 10 amps of battery current.
